HYPERION ATLAS DS 16 FMD METAL GEAR FULLY PROGRAMMABLE DIGITAL SERVO

THE ULTIMATE LOW COST HIGH PERFORMANCE DIGITAL PROGRAMMABLE TAIL SERVO FOR YOUR 500 CLASS HELICOPTER!

WHY PAY ANY MORE!

NEW! Hyperion MaxPrecision ATLAS DIGITAL TAIL SERVO, Fully-Programmable by USB Adapter, with superstrong Metal Gears!!

Awesome Cyclic Servo for the 500 Class Helicopters. A great price for spectacular performance. Purchase the USB adapter and you can fully customize and program your servo. See details Below.

CLICK HERE TO SEE DATASHEET WITH FULL SPECIFICATIONS AND USES

Weight	28.5g
Speed sec/60 deg 4.8v/6.0	0.18/0.15
Dynamic Torque Kg/cm 4.8/6/0v	4.5/5.5
Holding Torque Kg/cm 4.8/6.0v	9.0/11.0
Dimensions mm	32.0 x 16.0 x 31.5
Gear Train Primary Material	Metal
Bearing	Double Ball
Required Pulse	2.5 ~ 5 volt Peak to Peak Square Wave
Operating Temp	- 20 to +60 Degrees C
Current Drain (4.8V)	7.0mA /idle 150mA no load operating
Current Drain (6.0V)	7.0mA /idle 170mA no load operating
Stall Current (4.8V)	680mA
Stall Current (6.0V)	800mA
Minimum Input Voltage	3.5V under load
Maximum Input Voltage:	Unloaded input voltage should never exceed 7.8v, loaded input voltage max 6.6V
Drive	Direct Digital
Connector Wire Gauge	25AWG
Connector Wire Strand Count	30EA

PROGRAMMABLE PARAMETERS via PC with HP-AT-PRGUSB 3pin Adapter ( $17.95) or EMETER v2

E-mail a friend about this item.