Setting new standards in large electrics, the Swift will outperform the competition with lightning speed. The main shaft is 10mm and hollow making it ultra light. The control system is none other than the very precise 120 degree eCCPM found in the Predator & Raven with a rear mounted rudder servo. The Swift will also feature a belt drive and built-in autorotation system. The horizontal fins and vertical fins are made slim and exotic resulting in additional weight savings. The main frames were built with weight reduction and structural rigidity in mind. The helicopter with motor and servos as configured weighs in at a mere 3.4lbs. With it's lightweight components and instantaneous electric power, the Swift has earned it's named which was derived from the world's fastest species of birds.
Swift 16 comes in two version, Kit and ARF (Almost Ready to Fly). The parts of the R/C Helicopter on the Kit version require assembly while most of the parts for the ARF version come preassembled for your convenience.
Specifications:
- Main Rotor Blades: 500-550mm
- Tail Rotor Diameter: 21cm
- Length: 105cm
- Height: 34.4cm
- Weight: 1.56kg (Configured with brushless motor and servos)
Electronic Specifications:
- Speed Control: 50 Amp or better
- Motor: 900-1250kv (based on battery)
- Battery: 4S-6S Li-Po or 12 cell NiMH or NiCd
- Pinion: 8-14 tooth
- Head Speed: 1600-2100 RPM
Just Provide (Items required to fly but not included):
- 1x 6-Channel or better Radio Transmitter capable of 120 degree eCCPM
mixing with Transmitter Battery, and Transmitter Battery Charger
- 1x 6-Channel or better Receiver
- 1x Brushless Electric Motor
- 1x 50 Amp or better Brushless ESC
- 1x Pinion / Motor Gear
- 4x Standard or better Servos
- 1x Gyro (Heading Hold/Lock recommended)
- 1x 4S-6S Li-Po or 12 Cell NiMH Battery
- 1x Battery Charger
- 1x Transmiter Crystal
- 1x matching Receiver Crystal
- 1x Velcro Set (to hold battery)
- 1x RC Helicopter Tools
