NEW! Hyperion MaxPrecision ATLAS CORELESS DIGITAL SERVOS,
Fully-Programmable by USB Adapter, with superstrong All-Metal Gears and Double
Ball Bearings!!
This servo has
better specs than the $84.99 Futaba S9252 Digital Coreless Motor Servo. The
Hyperion DS20xSMD has more Torque, More Thrust, Metal Gears, at almsot half
the cost of the Futaba!
These are simply the best
servos you can buy at any price, and a great value too.
Perfect
centering, Top AND Bottom ball bearings, tough Metal gear trains, Digital torque
and precision, and full programmability all put the "control" back in your Radio
Control!
Great for 30-50-90 Class Helicopters, Large Rc Planes, Monster
Trucks, Buggies and more! A great price with spectacular performance. Purchase
the USB adapter and you can fully customize and program your servo. See details
Below.
Fully programmable for Speed, Deflection, Centering, REVERSE, and
more.
See Datasheet for Full Specifications and Programming Guide.
CLICK HERE to see
datasheet
DS20x Coreless Servo Data
ATLAS Servo Programming User Guide
ATLAS Servo User Guide
DS20x Digital Series "Standard Size-Coreless" Servos with Double
Bearings and Metal Gears (gear grease removed for
clarity)
| Weight |
52.5g |
| Speed sec/60 deg
4.8v/6.0v |
0.13/0.11 |
| Dynamic Torque
4.8v/6.0v |
7.0/8.0 Kg/cm
97.24/111.02 oz/in |
| Holding Torque
4.8v/6.0v |
14.0/16.0
Kg/cm
194.49/222.05 oz/in |
| Dimensions mm |
40.0 x 19.5 x 36.5mm |
| Gear Train Primary
Material |
Metal |
| Bearing |
Double Ball Bearings |
| Required Pulse |
2.5 ~ 5 volt Peak to Peak Square
Wave |
| Operating Temp |
- 20 to +60 Degrees C |
| Current Drain
(4.8V) |
7.0mA/idle
230mA no load |
| Current Drain
(6.0V) |
7.0mA/idle
300mA no load |
| Stall Current (4.8V)
|
1500mA |
| Stall Current
(6.0V) |
2000mA |
| Minimum Input Voltage
|
3.5V under load |
| Maximum Input Voltage:
|
Unloaded input voltage should never
exceed 7.8v, loaded voltage max 6.6v |
| Drive |
Direct Digital with
CORELESS motor |
| Connector Wire
Gauge |
22AWG |
| Connector Wire Strand
Count |
60EA |
|
PROGRAMMABLE PARAMETERS via PC with HP-AT-PRGUSB
3pin Adapter ( $17.95) or EMETER
v2 |
| Rotation in Degrees |
Adjustable
30 to 140 degreess total min/max ( i.e. 15 to 70 degrees each way) 90
degrees default (45 each way) |
| Reverse |
Clockwise/Counterclockwise, Clockwise
default |
| Speed |
1% to 100%
of Ratte Speed ( 100% default) |
| Servo Center |
+/- 127uS
(2 uS default) |
| Compatibility |
Programmer
allows selection of Common Transmitter brands to insure compatibility and
default
centering | |
