RC Super Sales
Home Shopping Cart Checkout Customer Service Policies About Us

image

HYPERION ATLAS DS 09 AMD (HP-DS09AMD) FULLY PROGRAMMABLE DIGITAL SERVO - Full Metal Gears!! Equivelant of Hitec HS-5065MG But better!

HYPERION ATLAS DS 09 AMD (HP-DS09AMD) FULLY PROGRAMMABLE DIGITAL SERVO - Full Metal Gears!! Equivelant of Hitec HS-5065MG But better!

NEW!! Hyperion ATLAS Sub-Micro Digital, Programmable Servos, 8g~9g (4.8V/5.5V)

At Over $14 less than an Equivelant New Digital Hitec HS-5065MG and less than the Analog Hitec HS-65MG these are simply the best servos you can buy at any price. They are slightly skinnier than the HS-65's but virtually the same length and have more torque.

Great on any 450 Class helicopter as as a Cyclic or Tail servo. Tons of Torque! Nothing on the market beats these in

  • Price
  • Performance
  • Reliability
  • Durability
  • Programmability

Perfect centering, top AND bottom ball bearings, and full Metal Gears, these absolutely rock. Use them in your plane, car, helicopter or any other application you need a tough, dependable micro class servo. The New Hyperion line of servos are taking over!

Fully programmable for Speed, Deflection, Centering, and more.
See Datasheet for Full Specifications and Programming Guide.

CLICK HERE to see datasheet

DS09 Sub-Micro Servo Data
ATLAS Servo Programming User Guide
ATLAS Servo User Guide


DS09 Digital Series Sub-Micro Servos with Top and Bottom Bearing, Metal Gears "GMD" Version Shown

Weight 8.4g
Speed sec/60 deg 4.8v/5.5v .18/.15
Dynamic Torque 4.8v/5.5v 2.0/2.4 Kg/cm
27.8/33.4 oz/in
Holding Torque 4.8v/5.5v 4.0/4.8 Kg/cm
55.5/66.5 oz/in
Dimensions mm 23.0 x 9.0 x 22.80 mm
Gear Train Primary Material Metal
Bearing Top & Bottom Ball Bearings
Required Pulse 2.5 ~ 5 volt Peak to Peak Square Wave
Operating Temp - 20 to +60 Degrees C
Current Drain (4.8V) 6.0mA/idle
130mA no load
Current Drain (5.5V) 6.0mA/idle
135mA no load
Stall Current (4.8V) 400mA
Stall Current (5.5V) 430mA
Minimum Input Voltage 3.5V under load
Maximum Input Voltage: Unloaded input voltage should never exceed 5.5v
Drive Direct Digital
Connector Wire Gauge 27AWG
Connector Wire Strand Count 20EA

PROGRAMMABLE PARAMETERS via PC with HP-AT-PRGUSB 3pin Adapter ( $17.95) or EMETER v2

Rotation in Degrees Adjustable 30 to 140 degreess total min/max ( i.e. 15 to 70 degrees each way) 90 degrees default (45 each way)
Reverse Clockwise/Counterclockwise, Clockwise default
Speed 1% to 100% of Ratte Speed ( 100% default)
Servo Center +/- 127uS (2 uS default)
Compatibility Programmer allows selection of Common Transmitter brands to insure compatibility and default centering

NEW!! Hyperion ATLAS Sub-Micro Digital, Programmable Servos, 8g~9g (4.8V/5.5V)

At Over $14 less than an Equivelant New Digital Hitec HS-5065MG and less than the Analog Hitec HS-65MG these are simply the best servos you can buy at any price. They are slightly skinnier than the HS-65's but virtually the same length and are much quicker.

Great on any 450 Class helicopter as as a Cyclic or Tail servo. Tons of Torque! Nothing on the market beats these in

  • Price
  • Performance
  • Reliability
  • Durability
  • Programmability

Perfect centering, top AND bottom ball bearings, and full Metal Gears, these absolutely rock. Use them in your plane, car, helicopter or any other application you need a tough, dependable micro class servo. The New Hyperion line of servos are taking over!

Fully programmable for Speed, Deflection, Centering, and more.
See Datasheet for Full Specifications and Programming Guide.

CLICK HERE to see datasheet

DS09 Sub-Micro Servo Data
ATLAS Servo Programming User Guide
ATLAS Servo User Guide


DS09 Digital Series Sub-Micro Servos with Top and Bottom Bearing, Metal Gears "GMD" Version Shown

Weight 8.4g
Speed sec/60 deg 4.8v/5.5v .18/.15
Dynamic Torque 4.8v/5.5v 2.0/2.4 Kg/cm
27.8/33.4 oz/in
Holding Torque 4.8v/5.5v 4.0/4.8 Kg/cm
55.5/66.5 oz/in
Dimensions mm 23.0 x 9.0 x 22.80 mm
Gear Train Primary Material Metal
Bearing Top & Bottom Ball Bearings
Required Pulse 2.5 ~ 5 volt Peak to Peak Square Wave
Operating Temp - 20 to +60 Degrees C
Current Drain (4.8V) 6.0mA/idle
130mA no load
Current Drain (5.5V) 6.0mA/idle
135mA no load
Stall Current (4.8V) 400mA
Stall Current (5.5V) 430mA
Minimum Input Voltage 3.5V under load
Maximum Input Voltage: Unloaded input voltage should never exceed 5.5v
Drive Direct Digital
Connector Wire Gauge 27AWG
Connector Wire Strand Count 20EA

PROGRAMMABLE PARAMETERS via PC with HP-AT-PRGUSB 3pin Adapter ( $17.95) or EMETER v2

Rotation in Degrees Adjustable 30 to 140 degreess total min/max ( i.e. 15 to 70 degrees each way) 90 degrees default (45 each way)
Reverse Clockwise/Counterclockwise, Clockwise default
Speed 1% to 100% of Ratte Speed ( 100% default)
Servo Center +/- 127uS (2 uS default)
Compatibility Programmer allows selection of Common Transmitter brands to insure compatibility and default centering

Price:  $32.95

Quantity:


In Stock? No
SKU HP-DS09AMD

E-mail a friend about this item.


Return to Catalog