OUTRAGE G5 COMBO Black Carbon Fiber Kit w/FG blades - KRG5002 - INCLUDES FREE 1300MAH Li-PO & K&B TAIL BLADE
Enter Page Title Here
INTRODUCING The all new
OUTRAGE G5!
The New
Generation of High Voltage Mini Class Helicopters. The T-REX 450 Killer!
CHECK OUT THE FREEBIES BELOW -
PACKAGE WORTH OVER $438.28
The new Outrage G5 is in a
class all its own. Developed by world class Helicopter Designer Charley Stephens
of Rotorworkz. http://rotorworkz.com/
Achieve 8+ Minutes of Hardcore 3D and much more
flying time for sport flying on a 6s 1300mAH Li-PO. The T-REX 450 can't even
touch that!
The Outrage uses 350mm Blades for lower disk loading and
runs a headspeed of only 2400rpm's!!! Tone it down to 2100-2200 for even longer
flights. Read below for more details.
CHECK OUT THESE FREE
BONUSES!!!!! - Colors will be sent upon availability
- If your color choice is not in stock we will pick a color for you.
Check out these videos of Henry Cladwell and Craig
Martin Layin it down with the Outrage G5. FYI both of these
pilots are flying the G10 frame version and not the Carbon Fiber one.
:)
Designed by
the well-respected helicopter designer Charley Stephens,
this new heli defines a new concept of low head speed, high
voltage micro helicopters. With super low amp draw (average
9amp compared to 25A of other 450 size helicopters) this
chopper can perform incredibly double 3D flight
time compared to its rivals on a single pack of battery at
unbelievable 2400rmp head speed. With programmable head and
tail, this heli is so versatile it can be suitable for
beginners to highest demand 3D
pilots.
Length: 620mm
Height : 210mm (including head button 203mm without)
Main Rotor Diameter: 775mm
Tail Rotor Diameter: 157mm
Blade Length:350mm
Main Gear 150T .5 mod gear
Auto Rotation 106T
Drive Gear 25T
Flying Weight 780-850 Grams depending on equipment used
Black plastic tail blade
Black fiberglass 350mm main blade
Painted fiberglass canopy
Black G10 frame, landing gear and fin
set
Beautify crafted CNC anodized parts
True 120 Degree CCPM Servo layout for precision control
and geometry
Compact frame height for enhanced 3D fight
characteristics
Large adjustable battery tray positions for various
battery shapes and sizes
Fiberglass 350mm extremely stable blades
15 Degrees +/- achievable pitch ranges
Programmable head - From Mild to Wild
Thrust bearings on main blade grips
One piece 3D dampers
Ceramic main and tail rotor shaft support bearings
High quality screw hardware
Programmable tail rotor ratios 11t included for 4.664:1,
(10t Optional for 4.24:1), (12t Optional for 5.088 :1)
Ball raced double pivot tail control system
High quality tail rotor drive belt
Fiberglass painted canopy
Compatible Parts with T-REX 450SE V2 as follows:
4mm spindle shaft
Main shaft
Main Gear/Tail Drive Gear
Front Driver Gear
Flybar rod 220mm
And of course Tail blades and Main Blades/ W 3S
setup
Can also be setup with a 3s Li-PO, using a 3000kv or
higher motor and correct pinion for your headspeed you want
to achieve. Basically setup like a T-REX 450 or similar 450
helicopter.
