FEATURES: Proven Twist and Lock Connector ensures a secure, solid connection
            that won't come off, providing safer, faster starts for your model.
          Pre-Installed Genuine Sanyo 5000mAh battery cell
          Included AC battery charger with hex-shaped charge end recharges
            the glow starter in 10 hours. A Red LED glows as unit is charging.
          Removable Red rubber socket cap prevents shorting and any dirt or
            dust debris from entering into the the shaft.
          One Year Limited Warranty USA and Canada only

INCLUDES: One Super Hot Shot 2 Standard Glo-Starter w/Red rubber protective cap
          One Hot Shot #2 Glo-Starter Battery Charger
          One Instruction/Header Card

SPECS:    Sanyo NiCd Battery: 5000mAh  1.2V
          AC Charger- Input: 110-120V AC 60Hz (US Standard)
                      Output: 1.25V DC 500mA
          Hot Shot- Overall Length: 4-5/8" (118mm)  Shaft Length: 2-1/4" (57mm)
                    Diameter:      1-5/16"  (33mm)

COMMENTS: How to use: To lock onto your engine's glow plug, place the end of
            the Hot Shot 2 over the plug and push down. Twist the Super Hot
            Shot #2 clockwise to lock into place.
          Charging: Before using, initial Charge should be 12 to 14 hours
            Subsequent charging time is approximately 10 hours
          For Hot Shot #2 Standard version    use HCAP2520
          For Hot Shot #2 Long version        use HCAP2522
Note:*** The charger originally packaged with this Glo-Starter has a 150mAh
            Charge rate which requires a long time to Charge the large mAh
            battery. The modeler Charges the battery initially for 24 hours.
            After that, 12-hour Charges each. If modeler is a regular flier,
            Charge twice a month for 24 hours.  ***