The new eXtreme V2 Series LiPo batteries are Thunder Power RC's top of the
line in Lithium Polymer packs. These Li Poly batteries use the newest state of
the art battery chemistry to provide higher voltage under load (25C continuous,
50C burst), and unmatched energy and power density. The eXtreme V2 series offers
higher continuous and burst discharge rates than the ProLite or first version of
the eXtreme series, and is perfect for high demand applications like RC 3D
helicopters, ducted fan jets, RC cars and boats.
The Thunder Power
eXtreme V2 LiPo Packs offer even more cycle life and increased power over the
previous generation TP eXtreme Series. Thunder Power RC eXtreme V2 Series LiPo
batteries are the RC industry’s most competitive Lithium Polymer battery packs
in both price and performance. These Thunder Power RC eXtreme V2 LiPos are the
most powerful Lithium Polymer batteries Thunder Power RC has ever
sold.
Specifications:
Type: Lithium Polymer
Capacity: 3300 mAh
Voltage: 14.8V nominal
Connector Type: 14 GA
Number of Cells: 4
Weight: 351g
Configuration: 4S
Dimensions (WxLxH): 25x44x148mm
Maximum Continuous Discharge : 25C (82A)
Maximum Burst Discharge : 50C (165A)
NOTE:
When using high energy Li-Polymer Batteries, please do not over-discharge or
over-charge batteries as this will result in over heated batteries. Discharging
capacity can't exceed 80% of the max capacity of the pack after full charging to
ensure a good cycle performance. It is recommended to fully charge a brand new
battery before using and only discharge the battery 50% for first 5 cycles.
Always monitor race time and/or set a low voltage warning on ESC (End voltage
cannot be lower than 3.2v per cell) Do not use the battery that has too low a
voltage.
Do not expose batteries to sunshine or store/charge batteries at
the temperature above 35°C or in a closed car. The high temperature environment
could cause damage to the pack or make it burst. If the battery becomes hot
while fast charging, high current discharging or racing, do not charge the
battery until it has cooled completely. Wait about 20 mins, then inspect prior
to recharging.
