| Description: |
| -The Advanced PRO eCCPM Frame is designed for DCLS (Direct Control Linkage System) to eliminate play on indirect control linkage system. The Advanced PRO eCCPM Frame allows MOTOR to be mounted either on TOP (***) or INSIDE the frame, GYRO can also be mounted ANYWHERE on the frame for best gyro sensitivity and protection, various BATTERY pack in LONG and TALL configuration can also be mounted ANYWHERE on frame for best center gravity and quick battery replacement.
-The Advanced PRO eCCPM Frame which 100% CNC machined mostly from Aluminum 7075, Carbon Fiber and Delrin material, offering most options challenged by every advanced 3D pilots! The Advanced PRO eCCPM Frame is built with total of 25 CNC masterpieces which is throughout designed and precisely manufactured that will transform your T-REX helicopters to an Ultimate Flying Machine!
-And yet, the Advanced PRO eCCPM Frame is even LIGHTER than stock plastic frame more than 4grams.
|
| Includes: |
| -Complete the Advanced PRO eCCPM Frame kit
-New Hardened CNC Aluminum Upper Frame
-New Hardened CNC Aluminum Lower Motor Mount
-New Hardened CNC Aluminum Side Frame Support
-All hardware and allen keys included
|
| Requires: |
| -Loctite (#242 is recommended) is required to apply to all mechanical screws for safety during fly.
-Clear Tape is required to wrap around the Tail Boom area within the 2 Tail Boom Bracket on the main frame for maximum security and safety during fly.
-Read and follow carefully the Assembly Instruction.
|
| Weight: |
| 87.0grams (Stock Plastic Frame is 91.2grams, save total of 4.2grams with Advanced PRO eCCPM Frame)
|
| Usage: |
| -T-Rex450/450X helicopters only
|
| Instruction: |
| -Included in the kit. |
| Features: |
| Light weight, stylish design, strong and durability. |
| Adjustable servo mounts which allow possibibilty of mounting various types of mini servo configuration, especially for the most popular Hitec mini servos HS-55 and HS-56HB |
| Designed to accomodate both types of battery configuration including 6 long cell pack and 6 tall cell pack |
| Designed with wider battery compartment to facilitate the battery swapping process, the battery wire's width is also accounted into the dimension of the new battery compartment |
| Adjustable angle tilt upper tray is designed to fit all kind of battery configuration for higher centric gravity of the heli for best acrobatic 3D performance |
| Designed to be able to mount various types of motors in its class such as brushless Chili Pepper, Hacker and AON motors... |
| Motors can be mounted either on TOP (***) or INSIDE of the frame. The motor mounting plate can be adjusted to fit different sizes of motor pinion from 8T up to 20T to match with different settings |
| Gyro unit can be mounted on top of the tail boom as the stock setup, or underneath of tail boom for better protection or even inside of the frame for closer to the main shaft for best gyro functionality and gyro protection |
| Hardened aluminum skid supports and Side Frame Support are built-in the frame to provide stronger support during hard landing |
| Super strong aluminum 7075 for most critical aluminum parts to provide highest strength support and also serves as extra heat sink for the motor |
| Designed for easy adjustment and maintenance |
