This is intelligent balanced Li-poly Battery charger, which can charger up to 4S LIPO battery packs by 4 individual separated charging units, and 1-9 cells series Ni-MH with Delta Peak Detector
The charge current and cut-off voltage are adjustable according to your setting
The LCD display is the most accurate charging status indicator
Note: This unit does not come or use the wall adapter.
specification
Balance Charging 2-4 cells Li-Poly
Manual Selectable Charge Voltage, Current and Time
Auto-detect Battery Type, Number and Voltage
Identification of Bad Battery
Series Charging 1-9 cells Ni-MH with Delta Peak Detector
Dynamic Display of charge voltage and current of each cell
Alarm and Safety Protection for Battery Reverse
Function of Battery Repair
MCU Auto-adjusted Closed Loop Current Feedback System for Constant Current Charge
Technical Specification
Input voltage range: 12V-15V DC
Adjustable charge current: 500mA, 700mA, 900mA, and 1100mA
Adjustable cut-off voltages: 4.15V, 4.25V, 4.35V
Battery repair current: 120mA
Recommended charging rate: 1CMax.
Battery type and number: Li-Poly battery pack with 2-4cells or
Ni-MH battery pack with 1-9 cells
LCD display: 4x32 characters
Operating temperat -10°C~40°C/ 14°F~104°F
Weight: 239g
AC/DC Adapter(selectable): Input voltage: 100V-240V
Output voltage: 12V
Output current: 5A
Other key Features
1. Dynamic Display of charge voltage and current of each cell
2. Alarm and Safety Protection for Battery Reverse plug-in
3. MCU based Auto-adjusted loop-locked Current Feedback System for Constant Current Charge during charge period
4. MCU based Auto-adjusted loop-locked Current Feedback System for lower Current Charge(100mA, and to 0mAh) during the battery is almost fully charged.
View of balancing charge connectors ( for 2s, 3s, and 4s Li-poly)
This charger is developed by Ucetech, Inc. It is CE certificated. And the 100 pins PLCC MCU (Micro Control Unit) provides the most accurate status and performance monitoring of the charging parameter in real-time. You can setup the charging current, Cut-off voltage and charging time. When an individual cell is fully charged, the cell will stop charging, but the other cell will remain to be charged, it is real balanced charger for your expensive Li-poly battery.
Compatibility
This charger fits with widely range of popular battery such as Dynam, Align, Emax, E-power, Aplus, DN Power, Dynamic, Himodel...batteries.
MCU AUTO-ADJUSTED CLOSED LOOP CURRENT FEEDBACK SMART CHARGER JB-1100
