1.Separate balancing and charging ports eliminating charging amperage limit due to balancing wires’ gauge.
2.Dual mode balancer: Can be used as stand alone balancer, or concurrently with a separate charger.
3. Automatically balance 2~6 cells li-poly packs.
4.Balancing voltage resolution accurate to ±0.005V.
5.Individual cells’ balancing status displayed through LEDs.
6.Overcharging prevention circuitry with cutoff set at 4.26V/cell for additional safety, minimizing potential damages to the cells.
7.Low voltage cutoff set at 3.3V/cell to prevent over discharging of cells.



NOTE:
Do not leave the charger is operating unattended as it may cause a fire.

Specification

• Lithium polymer cell count: 2~6 cells in series configuration
• Balancing activation voltage:
                        Automatic:>0.03V imbalance
                        Manual: >0.01V imbalance
• Discharge current during balancing: 350mA
• Imbalance control voltage: +/-0.005V
• Maximum cell voltage cut off: 4.26V
• Low voltage cut off: 3.3V
• Balancing voltage resolution: +/-0.005V
• Size:83x45x19mm
• Weight:120g

E-mail a friend about this item.