Product:	Package:
Apply to 2-3cells Li-ion/Li-ploymer Battery
Instructions:	Specification:
1.AC 100-240V exchange switch for international specification. 2.Aupply to 3.6V / 3.7V 2-3 cells Li-ion/Li-polymer batteries. 3.Balance charging is good to prevent the situation of over-charging or under-charging for a single cell. 4.Auto-detected charge status display. (Red light: while charging Green light: end of charging) 5.The auto-detected function of low voltage for power storage. 6.Reverse polarity protection and short circuit protection. Charge Method: 1.Series DC7.4V JST connector X 1 set (no more parallel charge plug in) 2.Series DC11.1V 20A connector X 1 set(no more parallel charge plug in) 3.Balance DC7.4V connector X 1 set 4.Balance DC11.1V connector X 1 set User Manual	Dimension: Length 135 x width 80x height 35 (mm) Series no: RCC-3CX Input Voltage: AC 100-240V 50-60Hz Output Voltage: 2cell DC 7.4V                           3cell DC 11.1V Output Current: 1000 mA/cell
	Precaution:
	Note! If the battery becomes hot while high current discharging or flying, please do not charge the battery immediately. Wait to cool down(about 20 mins), then inspect to recharge. If against follow the original factory using rules, possibly cause the battery to inflate or any dangerous accident happens.  This Li-ion/Li-polymer charger is recommended for the safty and efficiency of the battery.

E-mail a friend about this item.